How to Repair & Clean Your AC Remote at Home in just 5 mins: If your AC remote has stopped responding while operating, whether the buttons are stuck. Today everyone’s house has one AC (air conditioner).
Most of the AC is used in cities, especially in hospitals, offices and other shopping malls. Most of the problems in AC are remote and not working properly, says people.
In this post I will guide you how to repair your AC remote at home in simple and quick. We’ll show you how to open, clean, and repair your AC remote step by step using a few simple tools at home.
Table of Contents
Test the Remote First
We got a remote of Deccan AC, so first of all this is our remote tester. First of all we put the cells inside it and check whether this function is working or not, see, it is written on the display . But the button is not working and the power on and off is also not working. Then you should try these simple steps give below :
Also see :- Best 5G Phones Under ₹30,000 with Fast charging and Best camera in 2025
What You’ll Need to AC remote
- A small flathead screwdriver or prying tool.
- A soft, lint-free cloth Thinner or Isopropyl alcohol (for cleaning).
- A small brush or toothbrush.
- Optional: Mild detergent (for deep cleaning buttons).
Step 1: Opening the Remote
Most AC remotes don’t have visible screws. Instead, they’re locked with internal clips. We have to open the screws carefully.
1.Remove the batteries before doing anything.
2.Use a thin prying tool to gently open the remote casing.
3. Be careful not to break any clips. Apply even pressure along the edges.
Step 2: Cleaning the Inside
When the remote opens, you’ll see the circuit board and rubber pad containing the buttons which have dust in it.
Clean the Rubber Button Pad:
- Dip the cloth in thinner or isopropyl alcohol.
- Gently wipe both sides of the rubber pad.
- If it’s too sticky or oily (from food or skin oils), you can soak it briefly in warm, soapy water, then dry thoroughly.
Clean the Circuit Board:
- Use the brush to remove dust or grime.
- Lightly wipe the contact points (carbon pads) with thinner.
Step 3: Fix Sticky or Unresponsive Buttons
If any buttons seem stuck or don’t pop back up:
1.Check for dirt or debris underneath the rubber pad.
2.Clean inside each button cavity.
3.If needed, use a toothpick or tweezers to remove lodged dirt.
Step 4: Reassemble the Remote
Once everything is clean and dry:
1.Place the rubber pad back on the circuit board.
2. Align the top and bottom shells of the remote.
3. Snap them gently back together.Insert the batteries.
Step 5: Test the Remote
Turn on your AC or point the remote at any IR sensor to test:
1.Power button should work instantly.
2. Test all the buttons, if they respond smoothly, your job is done.
Final Tips & Maintenance
1.Avoid using the remote with oily or wet hands while eating.
2.Clean your remote every few months if you use it frequently.
3.Keep it away from moisture or spills.
Conclusion:
If AC Remote is not working properly and you should first think, is there any problem in not all cells? Then you should try to repair the remote on your own. By watching YouTube videos or reading this blog post. If there are any big problems in the AC remote you can consider the technician.